INDUS™ 3-Up Star Board – UV-A 380 nm (TSLC C3535U)
Multi-Emitter 380 nm UV-A Module for NDT Bays & Industrial Curing Assemblies
When inspecting large machined components in an NDT booth or building compact UV-A adhesive and ink-curing heads, integrating three matched 380 nm emitters on one metal-core star simplifies mechanical mounting and constant-current wiring. The INDUS™ 3-Up UV-A 380 nm star board (ISA-203) carries three TSLC C3535U-UNL1 emitters (380–390 nm peak, 1,800 mW minimum combined at 500 mA) wired in series via two 0-Ω jumpers on a 19.9 mm aluminum PCB. Built on the exact INDUS XP outline, mounting notches, thermal pads, and heatsinks, it delivers true UV-A below 400 nm in an OEM-ready multi-source format.
UV RADIATION · READ BEFORE USE
380 nm is UV-A and barely visible to the human eye—you cannot judge output or exposure by sight. Never look into the LED directly or through optics. Wear UV-rated eye protection and cover exposed skin when working at close range. Shield and label finished equipment. Photobiological risk group to IEC 62471: assess in the end product (depends on drive current, LED count, optics, and viewing distance). UV-A is not germicidal—do not use for disinfection.
Demanding Professional Applications
Penetrant & NDT Inspection
UV-A Adhesive & Ink Curing
Counterfeit Detection & Mineralogy
Three-Emitter UV-A Coverage
Three TSLC C3535U-UNL1 emitters (380–390 nm) wired in series deliver 1,800 mW min calculated at 500 mA, 25 °C; delivered irradiance depends on working distance, optics, and thermal control.
Worst-Case Thermal Sizing
Clear worst-case heatsink pairing across TSLC's 3.2–4.2 V bin range (6.30 W worst case at 500 mA → ISA-HS-9W) protects UV-A flux and LED lifetime.
3-Series INDUS Platform
Factory 3S wiring via two 0-Ω jumpers (11.10 V typ / 12.60 V max at 500 mA) on the shared ISA-203 metal-core PCB.
Radiometric, Electrical & Heatsink Pairing (3-Up, 3 in Series)
Calculated module totals from TSLC C3535U-UNx1 Series (Rev. 4, 3× per-LED specification) at IF = 500 mA, TJ = 25 °C. TSLC bins VF from 3.2 to 4.2 V; size your heatsink from the worst case. Above 500 mA, the 3-Up requires a larger heatsink than ISA-HS-9W. UV output and lifetime decline faster with heat than visible LEDs—keep the Tc pad cool.
| Parameter | Specification (3-Up · ISA-3TSU380-NN) |
|---|---|
| Emitters & Bin | 3× TSLC C3535U-UNL1-A1G11H-U40 (Bin U40 / NF1), 3 in series (3S) |
| Peak Wavelength | 380–390 nm (UV-A) |
| Minimum Radiant Power (3-Up) | 1,800 mW min at 500 mA, TJ = 25 °C (calculated, 3× per-LED minimum) |
| Forward Voltage (3S, 500 mA) | 11.10 V midpoint typ / 12.60 V max (9.60–12.60 V bin range) |
| Maximum Drive Current (IF) | 800 mA DC |
| Viewing Angle / Rth J-SP | 125° / 8.0 °C/W per LED (junction to solder pad) |
| Photobiological Safety (IEC 62471) | Assess in the end product |
| VF Case | Drive Current (IF) | 3-Up Voltage | 3-Up Power | 3-Up Heatsink Guidance |
|---|---|---|---|---|
| Typical VF (midpoint) | 500 mA | 11.10 V | 5.55 W | ISA-HS-6W or ISA-HS-9W |
| Worst-case VF (recommended) | 500 mA | 12.60 V | 6.30 W | ISA-HS-9W only |
| Worst-case VF (max IF) | 800 mA | 12.60 V | 10.08 W | Exceeds both (use larger fixture heatsink) |
Optics & Materials Near UV-A
No INDUS optic is offered for UV. Do not fit standard PMMA 3-Up TIR optics (such as FO-20XPA3-PM-15C)—acrylic and polycarbonate absorb UV-A below ~400 nm, yellow, and crack over time. Use glass, quartz, or UV-grade silicone optics and covers, and check adhesives, wire insulation, and plastics in the light path.
Mechanical and Optical Integration
| PARAMETER | SPECIFICATION |
|---|---|
| Board & form factor | ISA-203 · 19.9 mm flat-to-flat (20.4 mm across lobe tips), 6-lobe hexagonal star |
| PCB & overall height | 1.6 mm aluminum metal-core PCB (white solder mask); 3.6 mm overall height with LEDs |
| Emitters & circuit | 3× TSLC C3535U-UNL1 (3.45 × 3.45 mm) on Ø10.7 mm circle; 3-series (3S) via two 0-Ω jumpers |
| Holes & optics | Ø3.7 mm center wire-pass hole + 3 × Ø2.5 mm holes on Ø16.0 mm; no INDUS optic offered (use external quartz, glass, or UV-grade silicone) |
| Solder pads & Tc point | 3 pairs, 2.0 × 2.0 mm (connect driver to open +/− pair); Tc pad 7.8 mm from center |
| Mounting | Six edge notches (R1.6 mm on Ø19.0 mm) for #4 screws (M3 also fits) |
Ordering Options
Select Thermal Attachment and Termination above. Base catalog builds ship with no backing and solder pads (ISA-3TSU380-NN). Custom builds are available (MOQ and lead time apply).
| Option Group | Available Choices & SKU Code |
|---|---|
| Wavelength | UV-A 380 nm (U380, 380–390 nm peak) |
| Thermal Attachment | None (N) · HexaTherm™ Thermal Pad (T, 3M™ 8810 die-cut hex) · 3M™ VHB™ Tape (V, 4905 die-cut hex) |
| Termination | Solder Pads (N) · 6" Flying Leads (F) · Connector (C) · Harness (H) |
Part-number format: ISA-3TSU380-[BACKING][TERMINATION]. Example: ISA-3TSU380-TN = 3-Up, TSLC C3535U, UV-A 380 nm, HexaTherm™ 3M 8810 thermal pad, solder pads.
Compatible Accessories
| ACCESSORY TYPE | PART NO. | DESCRIPTION |
|---|---|---|
| Secondary Optic | None offered | Standard PMMA optics degrade under UV; use external glass, quartz, or UV-grade silicone optics |
| Thermal Interface Pad | 0A001-401 | 3M™ 8810 thermal pad (die-cut hex, 3-Up) |
| Mounting Tape | 0A001-403 | 3M™ VHB-4905 clear acrylic mounting tape (die-cut hex, 3-Up) |
| Passive Heatsink (6 W) | ISA-HS-6W | 6 W silver heatsink (typical VF at 500 mA only) |
| Passive Heatsink (9 W) | ISA-HS-9W | 9 W black heatsink (recommended for worst-case VF at 500 mA) |
Downloads
Reference model of the INDUS ISA-203 board (3.45 × 3.45 mm 3535 footprint). Overall height with TSLC C3535U-UNL1 is 3.6 mm nominal; use the UV 380 nm datasheet drawing for dimensions and tolerances.
Related UV & Single-Emitter Configurations
→ INDUS 1-Up UV-A 380 nm (ISA-201, single-emitter 600 mW min)
→ INDUS 3-Up Near-UV 405 nm (400–410 nm for 405 nm resins & photoresists)
- Choosing a selection results in a full page refresh.
- Opens in a new window.





