INDUS™ 3-Up Star Board – Near-UV 405 nm (TSLC C3535U)

Skip to product information
1 of 1

View our BAA/BABA Compliance page to learn about about how we can support making your project or product compliant.

Part#  ISA-3TSN405-NN

Regular price $33.99 USD
Regular price Sale price $33.99 USD
Sale Sold out
Wavelength
Thermal Attachment
Termination
The INDUS™ 3-Up Star Board – Near-UV 405 nm (TSLC C3535U) is made-to-order (2-4 week lead time). Volume discounts reflected in cart; contact Sales for large or custom orders.

Multi-Emitter 405 nm Near-UV Module for Curing Chambers & Inspection Arrays

When a single emitter cannot cover your exposure area or required irradiance budget, grouping three matched 405 nm LEDs onto one thermally conductive star simplifies wiring and fixture assembly. The INDUS™ 3-Up Near-UV 405 nm star board (ISA-203) integrates three TSLC C3535U-UNL1 emitters (400–410 nm peak, 1,950 mW minimum combined at 500 mA) wired in series via two 0-Ω jumpers on a 19.9 mm aluminum metal-core PCB. Built on the exact same mechanical footprint, mounting notches, thermal pads, and heatsinks as the INDUS XP range, it serves as a repeatable near-UV building block for 405 nm curing, fluorescence, and lab exposure equipment.

UV RADIATION · READ BEFORE USE

405 nm is near-UV. It looks violet-blue and dim to the human eye, but its eye and skin hazard is far higher than its apparent brightness suggests. Never look into the LED directly or through optics. Wear UV-rated eye protection and cover exposed skin when working at close range. Shield and label finished equipment. Photobiological risk group to IEC 62471: assess in the end product (depends on drive current, LED count, optics, and viewing distance). Near-UV is not germicidal—do not use for disinfection.

Demanding Professional Applications

Multi-emitter 405 nm resin and 3D-print post-curing chamber

Resin & 3D-Print Curing (405 nm Formulations)

Fluorescence excitation, forensic inspection, and leak detection array at 405 nm

Fluorescence, Forensic & Leak Detection

Photoresist PCB and laboratory exposure fixture with multi-emitter 405 nm modules

Photoresist & Lab Exposure

Three-Emitter 405 nm Output

Three TSLC C3535U-UNL1 emitters wired in series deliver 1,950 mW min calculated at 500 mA, 25 °C; delivered irradiance depends on thermal management, working distance, and optics.

Worst-Case Thermal Guidance

Sized cleanly around TSLC's 3.2–4.2 V bin range (6.30 W worst case at 500 mA → ISA-HS-9W) so fixtures stay cool and UV life stays high.

3-Series INDUS Platform

Factory 3S wiring via two 0-Ω jumpers (11.10 V typ / 12.60 V max at 500 mA) on the shared ISA-203 metal-core PCB.

Radiometric, Electrical & Heatsink Pairing (3-Up, 3 in Series)

Calculated module totals from TSLC C3535U-UNx1 Series (Rev. 4, 3× per-LED specification) at IF = 500 mA, TJ = 25 °C. TSLC bins VF from 3.2 to 4.2 V; size your heatsink from the worst case. Above 500 mA, the 3-Up requires a larger heatsink than ISA-HS-9W. UV output and lifetime decline faster with heat than visible LEDs—keep the Tc pad cool.

Parameter Specification (3-Up · ISA-3TSN405-NN)
Emitters & Bin 3× TSLC C3535U-UNL1-A1G11H-U60 (Bin U60 / NF2), 3 in series (3S)
Peak Wavelength 400–410 nm (near-UV / violet edge)
Minimum Radiant Power (3-Up) 1,950 mW min at 500 mA, TJ = 25 °C (calculated, 3× per-LED minimum)
Forward Voltage (3S, 500 mA) 11.10 V midpoint typ / 12.60 V max (9.60–12.60 V bin range)
Maximum Drive Current (IF) 800 mA DC
Viewing Angle / Rth J-SP 125° / 8.0 °C/W per LED (junction to solder pad)
Photobiological Safety (IEC 62471) Assess in the end product
VF Case Drive Current (IF) 3-Up Voltage 3-Up Power 3-Up Heatsink Guidance
Typical VF (midpoint) 500 mA 11.10 V 5.55 W ISA-HS-6W or ISA-HS-9W
Worst-case VF (recommended) 500 mA 12.60 V 6.30 W ISA-HS-9W only
Worst-case VF (max IF) 800 mA 12.60 V 10.08 W Exceeds both (use larger fixture heatsink)

Optics & Materials Near UV

No INDUS optic is offered for UV. Do not fit standard PMMA 3-Up TIR optics (such as FO-20XPA3-PM-15C)—acrylic and polycarbonate absorb UV, yellow, and crack over time. Use glass, quartz, or UV-grade silicone optics and covers, and check adhesives, wire insulation, and plastics in the light path.

Mechanical and Optical Integration

PARAMETER SPECIFICATION
Board & form factor ISA-203 · 19.9 mm flat-to-flat (20.4 mm across lobe tips), 6-lobe hexagonal star
PCB & overall height 1.6 mm aluminum metal-core PCB (white solder mask); 3.6 mm overall height with LEDs
Emitters & circuit 3× TSLC C3535U-UNL1 (3.45 × 3.45 mm) on Ø10.7 mm circle; 3-series (3S) via two 0-Ω jumpers
Holes & optics Ø3.7 mm center wire-pass hole + 3 × Ø2.5 mm holes on Ø16.0 mm; no INDUS optic offered (use external quartz, glass, or UV-grade silicone)
Solder pads & Tc point 3 pairs, 2.0 × 2.0 mm (connect driver to open +/− pair); Tc pad 7.8 mm from center
Mounting Six edge notches (R1.6 mm on Ø19.0 mm) for #4 screws (M3 also fits)

Ordering Options

Select Thermal Attachment and Termination above. Base catalog builds ship with no backing and solder pads (ISA-3TSN405-NN). Custom builds are available (MOQ and lead time apply).

Option Group Available Choices & SKU Code
Wavelength Near-UV 405 nm (N405, 400–410 nm peak)
Thermal Attachment None (N) · HexaTherm™ Thermal Pad (T, 3M™ 8810 die-cut hex) · 3M™ VHB™ Tape (V, 4905 die-cut hex)
Termination Solder Pads (N) · 6" Flying Leads (F) · Connector (C) · Harness (H)

Part-number format: ISA-3TSN405-[BACKING][TERMINATION]. Example: ISA-3TSN405-TN = 3-Up, TSLC C3535U, Near-UV 405 nm, HexaTherm™ 3M 8810 thermal pad, solder pads.

Compatible Accessories

ACCESSORY TYPE PART NO. DESCRIPTION
Secondary Optic None offered Standard PMMA optics degrade under UV; use external glass, quartz, or UV-grade silicone optics
Thermal Interface Pad 0A001-401 3M™ 8810 thermal pad (die-cut hex, 3-Up)
Mounting Tape 0A001-403 3M™ VHB-4905 clear acrylic mounting tape (die-cut hex, 3-Up)
Passive Heatsink (6 W) ISA-HS-6W 6 W silver heatsink (typical VF at 500 mA only)
Passive Heatsink (9 W) ISA-HS-9W 9 W black heatsink (recommended for worst-case VF at 500 mA)

Downloads

Reference model of the INDUS ISA-203 board (3.45 × 3.45 mm 3535 footprint). Overall height with TSLC C3535U-UNL1 is 3.6 mm nominal; use the Near-UV 405 nm datasheet drawing for dimensions and tolerances.

Related UV & Single-Emitter Configurations

→ INDUS 1-Up Near-UV 405 nm (ISA-201, single-emitter 650 mW min)

→ INDUS 3-Up UV-A 380 nm (true UV-A for processes below 400 nm)