LUMAflex™ White

1 4

View our BAA/BABA Compliance page to learn about about how we can support making your project or product compliant.

Part#  LS1A130715011LL

$128.00 USD
$128.00 USD
Sale Sold out
CCT
Power (W/ft)
Length
The LUMAflex™ White is made-to-order (2-4 week lead time). Volume discounts reflected in cart; contact Sales for large or custom orders.
Product Datasheet
RoHS 3 Certificate
Warranty Information

Endless Flexibility: Custom-Length White LED Tape for Seamless Architectural Runs

The LUMAflex™ White flexible LED tape delivers exceptional quality light with a CRI of over 90 in a variety of color temperatures (CCTs). It incorporates advanced 2835 LED chip technology and quality thermal management materials to ensure efficiency and reliability. This design enhances light quality while improving heat dissipation and overall flexibility. Compared to traditional 5050 LEDs, the smaller, lighter chips can be placed more densely, allowing the strip to adapt easily to various applications. Its smooth, dot-free illumination makes it especially well-suited for tight spaces like display cases, backlighting, and areas with reflective surfaces such as granite or tile.

Quick Specs

  • > 90 CRI across 1800K to 5000K
  • Max 1000 Lm/ft
  • Cuttable in 1" increments
  • 10mm width

Technical Specifications

Parameter Specification
LED Density: 48 LEDs / Ft
Colors: 1800K, 2200K, 2700K 3000K, 4000K & 5000K
Max Lumens: 1000/Ft
Power: 24VDC
Max Wattage: 7 Watts/Ft
Mounting: Doubled-Sided 3M Tape, or Clips
Cuttable: Every 1"
Strip Width: 10mm
IP Rating: IP20 (Indoor)
Connection: DC Plug, 6" Wire Leads or Optional No Leads

Custom Lengths

Unlike most suppliers, we offer LUMAflex LED tape in reel lengths up to 48ft and also pre-cut to custom reel lengths. Some applications might need a shorter section of strips which is why the LED strips can be cut every inch. There are clear cut marks on each strip along a thin black line running over solder pads.

End-to-End Connections

When there is a break in your application you can still run one strip to another using 20-24 gauge wire or LED strip connectors. TAKE NOTE: COB LED Strip's maximum run length is 32.8 feet (2 reels). After the maximum run length, the voltage drop becomes too great and you will lose light and efficiency from your system. If your application needs more than the maximum run length you will have to get another power supply or run wires from the extra strip directly back to the first power supply (wiring in parallel).

Connections can be made by soldering wire in between strips or by using solderless clamps. Only one end of the strips comes with a plug on it (except for full reel lengths which have 2) so if you want to make more connections you will need to solder or use strip connectors

Power

The strips need 24VDC input. This requires either a battery or 24V Power Supply. The strips run at roughly 14 Watts/M. Please make sure you have enough wattage when running your specified length. The below wattage chart has accurate wattage calculations for each length shown.

Connecting to power can easily be done with simple wire-to-wire techniques such as soldering, wire nuts, electrical tape, etc. If you have a plug-in adapter with a barrel plug on the end, screw-in terminal power plugs help turn the wire leads into a simple plug-in connection.  

Dimming

The strips are fully dimmable and can be used with 24V PWM dimmers. The dimmer will go between your power supply and strips. Find compatible controllers below in the PWM Dimmers section.

If you require an AC Dimming Control from Lutron or Leviton, use a dimmable power supply.